Note: Please review the included content listed with each plan before making a purchase, as the contents may vary depending on the specific building design.
What do the construction drawings include.
Below is a listing of the elements typically incorporated in a set of construction drawings published by SinelPlans Shop:
Coversheet – The cover sheet is an artist’s rendering of the finished garage. Typically, this page is not needed for construction, but rather offers a visual representation of what the structure will look like when construction is complete. Not all designers provide a cover sheet in their set of plans.
General Notes- in construction drawings are written instructions that accompany technical drawings and provide essential information needed to interpret and execute a building project. They serve as guidelines for contractors, engineers, and builders, ensuring that the design intent is carried out correctly and consistently. While the drawings illustrate the geometry and dimensions of a building, the general notes explain how materials, standards, and procedures should be applied on site. They form an integral part of the construction documents and are legally binding once included in the drawing set.
Floor Plan – The floor plan page(s) provide(s) the layout and construction for each floor of the structure. In general, these pages include room dimensions, window and door locations and sizes, wall sizes, notes about ceiling details and design, and other notes and details regarding layout and construction.
Foundation Plan – The foundation page is a detailed drawing of the foundation and includes necessary information such as the thickness of foundation walls, floor joist sizes and spacing, column locations, and other pertinent construction details and notes.
Exterior Elevations – The purpose of the exterior elevations page is to describe the look and feel of the structure’s exterior finish. It provides views of the garage on all four sides and specifies the type and placement of finish and trim materials including brick, siding, stone, stucco, roof shingles, and decorative elements like window shutters. Other details are provided on this page as well, like roof pitches and ceiling heights. In some instances, window and door sizes are called out here.
Sections – Construction drawing sections may be a separate page in the set of plans or they may be found on various pages throughout. In general, they are views of the structure showing the elements and composition of the foundation, exterior and interior walls, roofs, floors, and stair details. These drawings show the relationship between floors and indicate ceiling heights and rooflines.
Roof Layout-The overall layout and necessary details for roof design are provided in this section. If trusses are used, we suggest using a local truss manufacturer to design your roof trusses to comply with your local codes and regulations.
Door and Window Schedule- The Door and Window Schedule provides detailed information about all doors and windows specified in the building plan. This section typically includes:
- Quantity of each door and window type
- Dimensions (height, width, thickness)
- Type and style (e.g., single, double, sliding, fixed)
- Opening direction and swing (for doors)
- Placement references linked to floor plans and elevations
- Notes for installation or special requirements
Electrical Plan – Basic electrical information can be found on the floor plan page or on a separate page. This information reflects the suggested locations of switches, fixtures, and outlets when applicable.
Details – Structural details can be found on a separate structural drawing page or on various pages throughout the project. Detailed details provide information on how smaller elements, such as roof construction, joints, and the sizes and styles of other finishing materials, should be constructed.
Material List- Our Material List provides a detailed breakdown of the construction materials required for your project. This section typically includes:
- Framing lumber specifications (studs, beams, joists, rafters, etc.)
- Sheathing materials (roof and wall)
- Roofing materials (shingles, underlayment, etc.)
- Exterior finishes (siding, trim)
- Insulation types and quantities
- Doors and windows (sizes and types)
Note: Not all pre-drawn plans incorporate every element described here. Read please the description of each listing to familiarize yourself with the content.
Cut List – The Cut List provides a precise breakdown of all framing components that need to be cut, helping streamline the construction and material preparation process. This section typically includes:
- Exact lengths and quantities of framing members (studs, joists, rafters, beams, etc.)
- Material types and dimensions (e.g., 4×4, 6×6 lumber)
- Labeling or part numbers matching the framing plans
- Angles or special cuts where applicable (e.g., for roof rafters)
- Grouped lists by construction section (walls, roof, floor, etc.)
The Cut List is designed to reduce material waste, save time on-site, and ensure precision during the cutting and assembly process.
Note: Not all pre-drawn plans incorporate every element described here. Read please the description of each listing to familiarize yourself with the content.
What is not include.
Each plan is designed to be consistent with the International Residential Code (IRC) in effect at the time the plan was created, but SinelPlans does not warrant such conformity. Modifications may be necessary to meet applicable building codes or ordinances. Consult a builder, structural engineer or other construction professional as necessary SinelPlans specifically disclaims any responsibility for ensuring the plans, and/or any house built using the plans, satisfies local or other applicable building codes. Determining and complying with all applicable codes is your responsibility. Heating/air conditioning layouts and plumbing layouts are not included. Manufacturer instructions should be followed for all materials, appliances, and systems. Consult a local mechanical contractor for systems suitable for local climate conditions if required.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your Building plans to a local engineer for review and stamping.